E-amil: mail@refrachina.com

banner
Home » Knowledge » Content
Product Categories

The Application of Tungsten-Molybdenum Alloy

- Aug 30, 2018 -

     

The Application of Tungsten-Molybdenum Alloy                                               


  Tungsten molybdenum alloys can be used in more than high temperature molybdenum or molybdenum alloy. Such as in the Porche furnace for producing high melting refractory ceramic fiber with tungsten and molybdenum alloy as electrode, stream mouth and thimble parts, its service life than pure molybdenum products is much longer. Mo 30W than pure molybdenum with higher resistance to molten zinc corrosion performance, used for liquid zinc temperature measurement tube, some corrosion resistant components of the zinc solution pump rotor and zinc smelting furnace.


   Tungsten and molybdenum alloy due to the high melting point, good ablation resistance performance and anti solid particle erosion, flame, used for solid rocket engine gas rudder and guard plate etc. Parts.


  The nominal composition of tungsten molybdenum alloy used for: Mo 30W, Mo 50W and Mo 85W. Tungsten molybdenum alloys can be regarded as a transition between molybdenum and tungsten alloy. Therefore, the alloy can be used in a wide temperature range between molybdenum and tungsten.




Contact information:


Xian Econ Industrial Crop

E-mail:  mail@refrachina.com

Address:Suite A2202-03, Qujiang Exhibition International Building,Yanzhan Road,Xi'an,

              710061,China

Telephone:86-29-85325399

Fax:        029-85325610