Molybdenum wire is made of molybdenum and other precious metals. Pure molybdenum wire is used for wire winding, bracket, lead wire, heating element, molybdenum foil tape and auto parts spraying. Lanthanum molybdenum wire is used for glass sealing pieces, molybdenum foil tape and wire cutting high-temperature components. The life extension method of molybdenum wire is as follows:
Molybdenum wire in each discharge with the workpiece at the same time itself will be damaged, but the degree is very small, so in the new molybdenum wire after the best use of small energy processing parameters for cutting (to make it less damage), until the color of molybdenum wire completely white, and then switch to the normal high current for cutting. Before changing the molybdenum wire for cutting, it is best to let the molybdenum wire run for 5-10 minutes, so that the original internal stress is released.
When the wire cutting machine breaks, most of the broken ends are more than ten to dozens of circles after the reversal of the silk barrel. The molybdenum wire at both ends of the head and tail is easy to break. The solution is to move the control block of the forward and backward travel switch outward or inward every certain time.
Keep molybdenum wire in a ventilated and cool place with low humidity and keep the temperature between 20℃ and 25℃ as far as possible to avoid oxidation of molybdenum wire. Poor verticality may occur if molybdenum wire is placed for more than 6 months. Please check whether the package has been deformed or damaged before use.
Tell from the use, molybdenum wire, easily deformation fracture with wire of avoid by all means will not molybdenum wire bending, if not be careful bending, bending must be cut off, lest appear in machining process of broken wires, the points for attention during the processing, as the original poster said, plus a thread cutting fluid has a direct impact on the performance of molybdenum wire, cutting fluid will be black after use for a long time, To a certain time to replace the cutting fluid.
